Hot Tub Knowledge Hub
Share
š§ Which Hot Tub Pump Do I Need?
One of the most common questions we receive is "How do I know which pump fits my hot tub?"
Choosing the correct replacement pump doesn't have to be difficult. There are a few key details you should check before ordering.
1. Identify the Manufacturer
Most pumps are manufactured by brands such as:
- LX Whirlpool
- Waterway
- Aqua-Flo (Gecko)
- Balboa
- Espa
The manufacturer's name is normally printed on the label.
2. Check the Horsepower (HP)
Common pump sizes include:
- 1 HP
- 1.5 HP
- 2 HP
- 3 HP
Always replace your pump with the same horsepower unless advised otherwise.
3. Voltage
Your pump will normally be either:
- 230V (most common)
- 115V
Using the wrong voltage can damage your spa.
4. Measure the Plumbing Connections
Most UK hot tubs use:
- 1.5" unions
- 2" unions
Take a quick measurement before ordering.
Need Help?
If you're unsure which pump you need, simply send us a photo of the pump label and we'll identify the correct replacement for you.
š Browse Hot Tub Pumps
š§ Choosing the Right Hot Tub Filter
A clean filter is one of the most important parts of keeping your spa water crystal clear.
Replacing your filter every 12 months (or sooner if damaged) helps your hot tub run efficiently and keeps your water healthy.
How to Identify Your Filter
Look at:
- Height
- Diameter
- Top opening
- Bottom thread or opening
These measurements are enough to identify almost every filter.
Signs You Need a New Filter
ā Dirty water
ā Poor water flow
ā Cloudy spa water
ā Dirty or damaged pleats
ā Filter won't clean properly
Cleaning Tips
We recommend rinsing your filter weekly and using a dedicated filter cleaner every month.
A spare filter allows one to dry while the other is in use.
š Shop Hot Tub Filters
ā” Hot Tub Control Panels Explained
Your control panel is the command centre of your hot tub.
It controls:
- Water temperature
- Pumps
- Lights
- Air blower
- Filtration cycles
Popular Brands
- Balboa
- Gecko
- LX
- SpaNet
Not every control panel is compatible with every control box.
Before purchasing, check:
- Manufacturer
- Model number
- Number of buttons
- Cable connection
Need Help?
Send us a picture of your current control panel and we'll recommend the correct replacement.
š Shop Control Panels
š ļø 10 Simple Tips to Keep Your Hot Tub Running Perfectly
Looking after your hot tub doesn't have to be difficult.
Here are our top maintenance tips.
1. Clean your filters weekly
Dirty filters reduce water flow and make your heater work harder.
2. Test your water regularly
Maintain the correct chlorine or bromine levels.
3. Keep the water balanced
Maintain:
- pH 7.2ā7.6
- Alkalinity 80ā120 ppm
4. Keep the cover on
A quality cover reduces heat loss and saves money.
5. Replace filters annually
Even clean filters wear out over time.
6. Wipe the waterline
Prevent grease and scum build-up.
7. Drain every 3ā4 months
Fresh water keeps your spa performing at its best.
8. Inspect your jets
Ensure they're clean and free from debris.
9. Listen for unusual noises
Early detection can prevent expensive repairs.
10. Buy genuine replacement parts
Using quality replacement parts keeps your spa reliable for years to come.